Sony a6400 Mirrorless Camera - Manual (Page 94)

94
• The timecode advance may become
non-contiguous at the instant the
timecode is synchronized. If this
occurs, the timecode output on SDI
OUT and HDMI OUT will also be
non-contiguous.
• Timecode synchronization is not
performed if a camera is currently
recording, in order to maintain a
contiguous timecode.
• For lengthy continuous recording,
periodic timecode synchronization
cannot be performed, which may lead
to an offset of several frames per hour.
• When a camera is turned off, Wireless
TC LINK also stops. When the camera
is turned on again, Wireless TC LINK
is automatically executed.
10
To exit Wireless TC LINK, press
the MENU button.
b Notes
• The timecode continues to advance
contiguously when Wireless TC LINK
is stopped. To synchronize the
timecode once only at the start, stop
Wireless TC LINK before use after
synchronizing the timecode.
• After Wireless TC LINK is stopped,
you can execute Wireless TC LINK
again by performing only step
9 again
in the above procedure.
b Notes
• The Wireless TC LINK function is not available
when using the camcorder in the following
states.
– During movie recording/playback
– During thumbnail display
– SLOW & QUICK (S&Q MOTION, SUPER
SLOW MOTION)
– When executing other network functions
– AIRPLANE MODE
• The following functions are not available when
Wireless TC LINK is running.
– Menu operations
– Touch operation of the LCD screen
– DATE REC
– LOCK-ON AF
– FACE DETECTION
– COLOR BAR
– D. EXTENDER
– SLOW & QUICK (S&Q MOTION, SUPER
SLOW MOTION)
– NIGHTSHOT
– FOCUS MAGNIFIER
– AUTO MODE SET
– Other network functions
• During Wireless TC LINK execution, [TC
RUN] is set to [FREE RUN]. After the function
is stopped, the setting remains set to [FREE
RUN].
• During Wireless TC LINK execution, [TC
MAKE] is set to [PRESET]. After the function
is stopped, the setting remains set to [PRESET].
z Tips
• You can check the last synchronization time
with the status check function (p. 68).
• If the timecode from a smartphone is changed
during Wireless TC LINK execution, “TC has
been synced.” is displayed.
• After the “TC has been synced.” message
appears, the timecode is adjusted on each
camera.
Synchronizing the timecode of multiple cameras using a smartphone
(Continued)