Epson SureLab D570 Professional Minilab Photo Printer - Manual (Page 118)

Replacing or Adding New
Wireless Routers
If the SSID changes due to the replacement of a
wireless router, or a wireless router is added and a new
network environment is established, reset the Wi-Fi
settings.
Related information
U “Selecting Settings for Connecting to the
Computer” on page 118
Selecting Settings for
Connecting to the Computer
We recommend using the installer to connect the
printer to a computer. You can run the installer using
one of the following methods.
North America
Visit https://www.epson.com/support (U.S.) or https://
www.epson.ca/support (Canada) and search for your
product. Then download and run the installer and
follow the on-screen instructions.
Latin America
Visit https://www.latin.epson.com (Caribbean),
https://www.epson.com.br/suporte (Brazil), or https://
www.latin.epson.com/soporte (other regions) and
search for your product. Then download and run the
installer and follow the on-screen instructions.
Other Regions
❏
Setting up from the website
Access the following website, and then enter the
product name. Go to
Setup , and then start setting
up.
https://epson.sn
❏
Setting up using the software disc (only for the
models that come with a software disc and users
with computers with disc drives)
Insert the software disc into the computer, and
then follow the on-screen instructions.
Selecting Settings for
Connecting to the Smart Device
You can use the printer from a smart device when you
connect the printer to the same Wi-Fi network (SSID)
as the smart device. To use the printer from a smart
device, see the following.
U “Connecting to a Smart Device” on page 107
SL-D500 Series User's Guide
Wireless LAN Connection
118