Dell SE2722H 27" 16:9 LCD Monitor - Manual (Page 51)

Operating your monitor │ 51
OSD warning messages
Before the DDC/CI function is disabled, the following message is displayed.
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes No
Dell 27 Monitor
SE2722H
When the monitor enters Standby Mode, the following message appears.
Dell P2418HZ
Dell 27 Monitor
Entering Standby Mode
SE2722H
Dell P2418HZ
Dell 27 Monitor
Entering Standby Mode
SE2722H
If VGA or HDMI cable is not connected, a floating dialog box as shown below
appears. The monitor will enter Standby Mode after 4 minutes if left at this state.
Dell P2418HZ
Dell 27 Monitor
No HDMI Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/SE2722H
?
SE2722H
or