Connector panel & interfaces, Touchmonitor connections – Elo TouchSystems M-Series 2002L 19.5" LCD Touchscreen Monitor User Manual
Page 7
User Manual: 1002L, 1502L, 2002L
UM600012
Rev F,
Page 7 of 24
Connector Panel & Interfaces
Touchmonitor Connections
1. Connect the HDMI or Mini-VGA video cables between the m
2. \
onitor’s HDMI/Mini-VGA input connectors and your HDMI/VGA video source, respectively.
Tighten the video cable’s screws for best performance.
2. Connect the USB touch cable between the monitor
’s USB connector and your PC’s USB
port.
3. Connect the audio cable between the monitor’s Audio In jack and your audio source.
4. Select the correct power clip for your region and clip to the power adapter. Connect the power
a
daptor’s input connector to the power source. Connect the power adaptor’s DC output
connector to the monitor’s input power jack.
5. The touchmonitor ships in an OFF state. Press the power button to turn it on.