HP M24 23.8" Webcam Monitor - Manual (Page 16)

If your last video input connection was to DisplayPort, the monitor automatically scans and
switches to USB Type-C video, DisplayPort, or HDMI video input source.
You must reconnect to the correct DisplayPort input using the OSD menu. To reconnect, press the
OSD button on the monitor, select Menu, select Input, and then select a DisplayPort setting.
● Connect one end of an HDMI cable to the HDMI port on the rear of the monitor and the other end to
the HDMI port on the source device.
● Connect one end of a USB Type-C cable to the USB Type-C port on the rear of the monitor and the
other end to the USB Type-C port on the source device. (Use only the HP-approved USB Type-C cable
provided with the monitor.)
NOTE: The monitor’s USB Type-C port provides data, video, and power delivery (up to 65 W).
The host device must be able to support DisplayPort Alt Mode (video, charging, and USB) over the
USB Type-C connector.
3. Connect one end of the power cord to a grounded AC outlet. Then connect the power cord to the power
connector on the monitor.
WARNING! To reduce the risk of electric shock or damage to the equipment:
Connecting the cables 11