Lenovo ThinkVision 29" Ultrawide Monitor - Manual (Page 19)

Using On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
E29w-20
Screen Controls
Advanced Setup
Options
OSD Setting
Exit
Brightness 75
Contrast 75
Volume 50
Mute Off
Input Signal: HDMI Resolution: 2560x1080 Color Mode: Reddish Volume: 70
To use the controls:
1. Press
to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press to access the selected
function. If there is a sub-menu, you can move between options using or , then press to
select that function. Use or to make adjustments then press to save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental adjustments to
the OSD. Press and hold for 10 seconds to unlock the OSD and allow adjustments to the
OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold for 10 seconds to disable/
enable DDC/CI function. A message "DDC/CI disable" is shown on the screen.
6. The ENERGY STAR option resets all user settings to default values so that the monitor can
meet the requirements of Energy Star.
Energy Star is an energy saving program for consumer electronics led by the U.S. government.
It was launched in 1992 by EPA and DOE to reduce energy consumption and greenhouse gas
emissions. Energy Star logo is a symbol of energy conservation and environmental protection.
It improves the concept of energy efficiency of consumers and manufacturers, and effectively
guides the market.
The regulation of Energy Star improves energy efficiency and reduces air pollution by using
more energy-efficient equipment in homes, offices and factories. One way to achieve this goal
is to use management to reduce energy consumption when products are not in use.
The default settings for monitors conform to Energy Star certification. Any changes by users
for more features and functionalities may increase power consumption, which will exceed
the limitation of Energy Star’s standard. If the user changes the options related to energy
efficiency when using, such as brightness, color mode, etc., select All Reset Factory or choose
the Energy Star option, the power consumption will be restored to the energy efficiency with
Energy Star standard.
For more information, please refer to (www.energystar.gov/products). All products of Energy
Star will be posted online and can be accessed directly by governments, public institutions and
consumers.
2-4 Flat Panel Monitor User’s Guide