Lenovo Q27q-20 27" 1440p HDR Monitor - Manual (Page 20)

Chapter 2. 2-9
Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor�
Do not:
• Apply water or liquid directly to your monitor�
• Use solvents or abrasives�
•
Use flammable cleaning materials to clean your monitor or any other electrical equipment.
• Touch the screen area of your monitor with sharp or abrasive items� This type of contact may
cause permanent damage to your screen�
• Use any cleaner which contains an anti-static solution or similar additives� This may harm the
coating of the screen area�
Do:
• Lightly dampen a soft cloth with water and use this to gently wipe the covers and the screen�
•
Remove grease or finger marks with a damp cloth and a little mild detergent.
Detaching the monitor base and stand
Step 1: Place the monitor on a soft and flat surface.
Step 2: Remove the screws from base before detaching base and stand from the monitor�
Wall Mounting (Optional)
Refer to the instructions that come with the base mounting kit� To convert your LCD display from
a desk-mounted to a wall-mounted display, do the following:
Step 1: Verify that the Power button is turned Off, then disconnect the power cord�
Step 2: Lay the LCD display face down on a towel or blanket�
Step 3: Remove the base from the monitor, refer to "Detaching the monitor base and stand"�
Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit
(100mm x 100mm distance), VESA Mounting Screw M4 x 10 mm�
VESA hole VESA hole
Step 5: Attach the LCD display to the wall, following the instructions in the wall-mounting kit�
For use only with UL Listed Wall Mount Bracket with minimum weight/load: 8kg