Lenovo T24M-20 23.8" USB Hub Monitor - Manual (Page 12)

1-4 T24m-20 Flat Panel Monitor User’s Guide
Setting up your monitor
This section provides information to help you set up your monitor.
Connecting and turning on your monitor
Note: Be sure to read the Safety Information located in the Flyer before carrying out this procedure.
1. Power off your computer and all attached devices, and unplug the computer power cord.
2. Connect one end of the DP cable to the DP connector on the back of the computer, and the other
end to the DP connector on the monitor. Lenovo recommends that customers who require using the
Display Port input on their monitor purchase the "Lenovo Display Port to Display Port cable
0A36537".
For more information, go to the following:
www.lenovo.com/support/monitor accessories
3.
Connect one end of the HDMI cable to the HDMI connector on the back of the computer, and the other
end to the HDMI connector on the monitor. Lenovo recommends that customers who require to use the
HDMI input on their monitor purchase the “Lenovo HDMI to HDMI cableOB47070”.
For more information, go to the following:
www.lenovo.com/support/monitor accessories