Broncolor Siros 800 L Battery-Powered Monolight - Manual (Page 8)

10
2. INITIAL COMMISSIONING
1. Remove the protective cover 2. Press the “on / check” button
3. Install the battery 4. Switch the unit on at the main switch
11
3. CONTROL ELEMENTS
Element Function
Rotary controller (1) Switches the unit on and off (stand-by mode). Pressing
the rotary controller for 3 s switches the unit to standby
In menu: menu navigation and confirmation of menu
items. There is an explanation of menu navigation
in Section 5
In operation: changes the flash energy. Turning anti-
clockwise reduces the flash energy, turning clockwise
increases it. Turning slowly changes it in 1/10 th.
f-stop steps, turning fast (“twisting”) in 1/1 f-stop steps
Info display (2) Shows the flash energy selected, or the menu options
Mod / Eco on / off (3) A short press switches the modelling light on or off
A long press switches between Normal and Eco modes
test
Test initiation (4) Test initiation: the “ready” display around the rotary
controller changes to blue as soon as the charge /
discharge operation has been completed. A long press
switches the unit back to the default settings
Menu function
speed Speed (5) For fast charging and flash times. See explanation
in Section 7
WiFi
WiFi (6) Shows whether WiFi is switched on or off
HS
HS (7) Indicates whether HS is switched on or off
st/ch
Studio / Channel (8) Is the menu item for selecting the current studio channel
(
RFS 2 )
lamp Lamp (9) Is the menu position to select a certain lamp channel
(
RFS 2 )
seq
Sequence (10) Is the menu position to select a certain number
of flashes
beep Beep (11) Shows if the acoustic “ready” warning is switched
on or off
sync
Sync (12) Permits the selection of different methods of release
(photocell, radio, photocell and / or radio)
Sync socket / Micro
USB (13 / 14)
For release via the sync cable, or software update
via Micro
USB
On / Off (15) To switch the unit on and off. After switching the unit on,
it is only possible to switch it off again after a delay
period of 4 seconds