Westcott FJ200 Strobe - Manual (Page 13)

4. Rotate the ​ Control Dial ​ until ​ TTL ​ mode is selected. [Note: If the strobe does not advance to TTL
selection, then ensure that “Wireless” is turned ON in the ​ Settings ​ menu.]
5. Engage the TTL setting by quickly pressing the center ​ Control Dial ​ or by pressing the ​ Return |
Model ​ button once.
6. Rotate the ​ Control Dial ​ to make further changes in the ​ Settings ​ menu or press the ​ Return |
Model ​ again to return to the main control screen.
7. TTL mode is now enabled. While in TTL mode, rotate the ​ Control Dial ​ to adjust the Flash
Exposure Compensation (FEC) of the strobe between -3.0 and +3.0 ( ±0.1 adjustments).
NOTE: ​ ​ The Flash Exposure Compensation selected on the FJ200 strobe screen is independent of the
Flash Exposure Compensation controlled by the FJ-X2m Wireless Radio Trigger or FJ80 Universal
Speedlight.
Enabling ‘Manual’ Mode Operation
1. Quick press the center ​ Control Dial ​ once to enter the ​ Settings ​ menu.
2. Rotate the ​ Control Dial ​ until ​ Mode ​ is selected within the thin white box.
3. Once selected, quickly press the ​ Control Knob ​ until the thin box turns blue.
4. Rotate the center ​ Control Dial ​ until ​ M ​ mode is selected.
5. Engage ​ Manual ​ mode [ ​ M] ​ by quickly pressing the center ​ Control Dial ​ or by pressing the ​ Return |
Model ​ button once.
6. Rotate the ​ Control Dial ​ to make further changes in the ​ Settings ​ menu or press the ​ Return |
Model ​ again to return to the main control screen.
7. Manual ​ mode is now enabled. While in ​ Manual ​ mode, rotate the ​ Control Dial ​ to adjust the output
of the strobe between 1.0 and 9.0 ( ±0.1 adjustments).
NOTE: Manual functionality does not require the use of a compatible wireless triggering device. Manual
mode can be achieved with wired, optical, or wireless receivers limited to manual flash triggering only.
FJ200 Strobe: SYNC Functions
Enabling ‘Normal’ Sync
Ideal in normal scenarios and when color consistency ​ (5500K ±150), ​ full-power output (200 Ws), and the
fastest recycling is essential.
1. Quick press the center ​ Control Dial ​ once to enter the Settings menu.
2. Rotate the ​ Control Dial ​ until ​ SYNC ​ is selected with the thin white box.
3. Once selected, quickly press the ​ Control Knob ​ until the thin white box turns blue.
4. Rotate the ​ Control Dial ​ until ​ NOR ​ sync is selected.
5. Engage ​ NOR ​ sync by quickly pressing the ​ Control Dial ​ or by pressing the ​ Return | Model ​ button
once.
6. Rotate the ​ Control Dial ​ to make further changes in the ​ Settings ​ menu or press the ​ Return |
Model ​ again to return to the main control screen.
12