Epson C82332 - Manual (Page 39)

Setting the queue polling time interval
Use EPSON Net! to change the interval at which the parallel
port(s) check queues for waiting print jobs. To reduce network
traffic, you can change the polling interval from 1 second up to 90
seconds. The default setting is 5 seconds.
1. From the NetWare config dialog, enter a value, in seconds, from
1 to 90 in the Poll Time (sec) box.
2. Click Save to save your setting changes.
Caution:
Once you make changes to the Ethernet Card, you must wait for
at least five minutes before turning off or rebooting your printer.
Using the Ethernet Card as a Remote Printer
Each Ethernet Card that is set up as a remote printer needs to be
defined on any Novell print server. When defined, the remote
printer may have its printer port defined, such as LPT1 or COM2.
The Ethernet Card currently ignores this setting, but to maintain
compatibility, you should define a remote printer as LPT1.
Before running EPSON Net!
Before using the EPSON Net! setup utility to install the Ethernet
Card as a remote printer, you must do the following:
1. From any NetWare workstation, log on to the network with
supervisor privileges.
Note:
Menu screens will differ slightly on NetWare 4.x, and Bindery
Emulation has to be selected. Press F4 to switch between Director y
Services and Bindery Emulation.
2-14 Installing on Novell NetWare