Epson C82332 - Manual (Page 42)

Changing the port number
Use the EPSON Net! utility to change the parallel port number for
the remote printer as follows:
1. Enter the number for any available port in the Port No. box. The
available settings for Novell NetWare versions 3.x and below
are from 0 to 15. For Novell 4.x and higher, the available
settings are from 0 to 254.
2. Click Save to save the port setting.
Enabling/disabling Hunting
You can use EPSON Net! to turn the Ethernet Card’s Hunting
feature on or off. When Hunting is on, the interface card connects
to the first available unassigned active port. This feature is useful if
the Novell print server has many printer ports. To change this
setting, follow these steps:
1. Click On under Hunting to enable the function. The default
setting is Off.
2. Click Save to save the setting.
Installing on Novell NetWare 2-17