Epson C82332 - Manual (Page 49)

Selecting a Zone with Epson Zoner
A zone is a group of users, computers, and devices, including
printers. Zones can be grouped according to physical location, and
would include, for example, all of the printers in a particular
building. Zones can also be grouped logically, according to work
groups or departments. For example, Zone 1 could contain all of
the printers used by a company’s marketing department or
publications group.
Use the Epson Zoner utility to assign your printer to a specific
zone on a Phase II Ethertalk network.
Note:
Epson Zoner cannot be used on a Phase I network.
Using Epson Zoner
Follow these steps to select a zone for your printer.
1. Make sure that your Ethernet Card-equipped printer is on and is
ready. After turning on the printer, it will take about a minute
for PostScript to initialize.
2. Insert the EPSON Net! for Macintosh disk into your computer.
Double-click the disk icon to open it, if necessary.
3. Create a new folder for Epson Zoner, if desired, and then copy
the utility to your Macintosh.
3-6 Installing on an Apple Ethertalk Network