FujiFilm EF-60 Shoe Mount Flash - Manual (Page 11)

Mode Dial
The flash is triggered by a light from another flash unit
(primary flash).
The flash is triggered by a light from another flash unit
(primary flash). It ignores monitoring pre-flash for TTL
operation.
Secondary Mode SF
Secondary Mode SD
Setting Method
• Set the mode dial to SF when the flash mode of the primary
flash (commander) is manual, or to SD when the flash mode
of the primary flash (commander) is TTL.
• Set the mode button to select SF mode or SD mode.
• Rotate the control wheel and buttons to set the flash output.
The flash output can be adjusted from 1/1 to 1/256 in 1/3EV
steps.
• Press the shutter button to shoot.
• Check the exposure of the shot
image and adjust the flash output if the optimum exposure
cannot be obtained.