Godox VING V850II Li-Ion Flash Kit - Manual (Page 12)

- 29 -
6. S1 Mode: S1 Slave Triggering Mode
● Long Press < > button for 2
seconds to enter the custom menu
and press < > Button to choose
OS. Then, turn the Select Dial to
choose OFF/S1/S2.
● In S1 mode, the flash unit
can function as a slave flash for
creating multiple lighting effects. It
is respectively applicable to
manual flash environment.
● In S1 mode, the flash unit will fire
synchronously when the master
flash fires, the same effect as that
by the use of radio triggers.
7. S2 Mode: S2 Slave Triggering Mode
● Long Press < > button for 2
seconds to enter the custom
menu and press < >Button to
choose OS. Then, turn the Select
Dial to choose OFF/S1/S2.
● In S2 mode, the flash unit
can function as a slave flash for
creating multiple lighting effects.
It is applicable when using a TTL
master flash.
● In S2 mode, the flash unit will
ignore a single “preflash” from
the master flash and will only fire
in response to the second, actual
flash from the master.
8. Hi-Speed Sync Triggering
● To enter < > mode, long press
< > button and hold for 2
seconds.
● To exit <
> mode, press Mode
Selection Button or long press
< > button and hold for 2
seconds again.
● In <
> hi-speed sync triggering
mode, you can use a hi-speed
sync trigger to have your flash unit
synchronized with all shutter
speeds of cameras (max. 1/8000
second, up to your camera). This
is convenient when you want to
use aperture priority for fill-flash
portraits.
Note:
*Hi-speed sync triggering mode is effective only when the flash
unit is used together with the following flash triggers.
1. Hi-speed sync trigger, e.g., Godox Cells II transceiver.
2. TTL wireless flash trigger X1C
3. TTL wireless flash trigger X1N