Godox VING V850II Li-Ion Flash Kit - Manual (Page 9)

- 26 -
● Loading and Unloading the Battery
To load the battery, push the
battery compartment cover
downward and open it.
According to the triangle sign on
the battery pack, insert it into the
compartment until a white knob
locks the battery with a click
sound.
To unload the battery, tap the
white knob and the battery pack
will pop out. Then close the
compartment.
● Battery Level Indication
Make sure the battery pack is securely loaded in the flash. Check
the battery level indication on the LCD panel to see the remaining
battery level.
Battery Level
Indication
Meaning
3 grids Full
2 grids Middle
1 grid Low
Blank grid Lower battery, please recharge it.
Blinking
The battery level is going to be used out
immediately. And the flash will auto power off
in 1 minute. Note: Please recharge the battery
as soon as possible (within 10 days).
Then, the battery can be used or be placed for
long period.
Attach the Camera Flash.
● Slip the camera flash’s mounting
foot into the camera’s hotshoe all
the way.
Secure the Camera Flash.
● Rotate the locking screw on the
mounting foot until it locks up.
Detach the Camera Flash.
● Rotate the locking screw on the
mounting foot until it is loosened.
1
2
3
Attaching to a Camera
1
2
3