RED DIGITAL CINEMA KOMODO 6K Digital Cinema Camera (RF) - Manual (Page 173)

COPYR IGHT © 2 0 2 0 R E D.COM , LLC 9 5 5 -0 1 9 0 , R E V 1 .2 | 1 6 5
STATUS ICONS
The following is a table of the camera's status icons.
ICON DESCRIPTION
The CFast 2.0 media card is good ( and recording time remaining)
The CFast 2.0 media card is missing
The CFast 2.0 media card is incompatible
The sensor temperature (T) and exposure (E) calibration are good
The sensor temperature (T) requires calibration
The sensor exposure (E) requires calibration
Gray indicates that no Timecode generator signal is detected
Green indicates that the Timecode source is connected and jammed
Red indicates that the Timecode source is connected and not jammed
White indicates that the Timecode source is jammed and not connected
Yellow indicates that the Timecode source is cross-jammed (at a different Project Time Base )
Gray indicates that no Genlock signal is detected
Green indicates that the camera is receiving and is locked to a Genlock signal
Red indicates that the camera is receiving and is not locked to a Genlock signal
Gray indicates that no synchronization is detected
Green indicates that the camera is synchronized with the Timecode and Genlock signals
Yellow indicates that the camera is synchronized with the a single camera or a Genlock signal
Gray indicates that no 3D LUTs are in use
White indicates that the camera is using a 3D LUT
Camera temperature is good
Camera overheating warning
Camera overheating
KOMODO OPERATION GUIDE