RED DIGITAL CINEMA KOMODO 6K Digital Cinema Camera (RF) - Manual (Page 84)

TIMECODE SOURCE
Use Timecode source to configure the Timecode source the camera applies to the recordings.
You can set the Timecode source as Internal Time of Day (TOD) or External.
When you set the camera Timecode source to External, you can connect an external Timecode generator to the
Extension Port .
TIMECODE DISPLAY MODE
Use Timecode Display Mode to configure the Timecode display type that the camera applies to the recordings.
You can set the Timecode Display Mode as Time of Day (TOD) or Edge.
TOD DISPLAY MODE
Time of Day (TOD) display mode displays the Timecode as the time of day that the frame was recorded.
EDGE DISPLAY MODE
Edge display mode displays the Timecode as the sequential recording time that has elapsed starting with the first
frame.
COPYR IGHT © 2 0 2 0 R E D.COM , LLC 9 5 5 -0 1 9 0 , R E V 1 .2 | 7 6
KOMODO OPERATION GUIDE