Philips H-Line 55BDL3202H 55" Full HD Digital Signage LED Display - Manual (Page 25)

55BDL3202H
14
3.6. IR Pass-through Connection
DVD / VCR / VCD
(DVD / VCR / VCD)
Remote Control
FORMAT SOURCE
INFO LIST
OPTIONS ADJUST
VOL
NORMAL ID
ID SET ENTER
[IR OUT]
[IR IN]
3.7. Wire-connecting to Network
PC
[RJ-45]
[RJ-45]
ROUTER
INTERNET
Network Settings:
1. Switch the router on and enable its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press
[ ] HOME button on the remote control, then select Setup .
4. Select Connect to network , then press [ ] button.
5. Wait until this display finds the network connection.
6. Wait for this display to find the network connection.
7. If the “End User License Agreement” window prompts, accept the agreement.
NOTE: Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.