DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller - Manual (Page 90)

DJI Mini 4 Pro User Manual
90
© 2023 DJI All Rights Reserved.
Linking the Remote Controller
The remote controller is already linked to the aircraft when purchased together as a combo.
Otherwise, follow the steps below to link the remote controller and the aircraft after activation.
1. Power on the aircraft and the remote controller.
2. Connect a mobile device to the remote controller, and Launch DJI Fly.
3. In camera view, tap
and select Control and then Re-pair to Aircraft. The remote controller
beeps during linking.
4. Press and hold the power button of the aircraft for more than four seconds. The aircraft
beeps once, and its battery level LEDs blink in sequence to indicate it is ready to link. After
the linking is successful, the battery level LEDs of the remote controller will appear on and
solid.
• Make sure the remote controller is within 0.5 m of the aircraft during linking.
• The remote controller will automatically unlink from an aircraft if a new remote
controller is linked to the same aircraft.
• Turn off Bluetooth and Wi-Fi of the remote controller for optimal video transmission.
• Fully charge the remote controller before each flight. The remote controller sounds
an alert when the battery level is low.
• If the remote controller is powered on and not in use for five minutes, an alert will
sound. After six minutes, the remote controller automatically powers off. Move the
control sticks or press any button to cancel the alert.
• Adjust the mobile device holder to make sure your mobile device is secure.
• Fully charge the battery at least once every three months to maintain the battery’s
health.
• DO NOT operate the aircraft when the light condition is too bright or too dark using
mobile phone to monitor flight. User is responsible for the correct adjustment of
display brightness and shall take care of direct sunshine onto the screen during
flight operation.
• Make sure to use a mobile device together with the DJI RC-N2 remote controller to
control the aircraft. If the mobile device turns off for any reason, land the aircraft as
soon as possible for safety.