Onkyo A-9110 2-Channel 100W Integrated Amplifier - Manual (Page 5)

5 En
Before use
1. Í ON/STANDBY button
2. Remote control sensor: Receives signals from the remote
controller.
0 The signal range of the remote controller is within
about 16
y /5 m, at an angle of 20° on the perpendicular
axis and 30° to either side.
3. Volume controller
4. Input source indicators: The indicators light according to
the selected input source.
0 The indicator for the selected input source blinks when
MUTING (
 p7) is active.
5. INPUT dial: Switches the input source to be played.
6. BASS -/+ controller: Enhance or moderate the bass range
of the speakers. (  p17)
7. TREBLE -/+ controller: Enhance or moderate the treble
range of the speakers. (  p17)
8. BALANCE L/R controller: Adjust the left/right audio
balance. (  p18)
9. DIRECT button/indicator: Switch the DIRECT feature on
and off. The indicator lights when the DIRECT feature is
on. (
 p17)
10. PHASE MATCHING BASS button/indicator: Switch the
PHASE MATCHING BASS feature on and off. The
indicator lights when the PHASE MATCHING BASS
feature is on. (
 p17)
11. PHONES jack: Connect stereo headphones with a
standard plug (Ø1/4"/6.3 mm diameter).
Front Panel
Part Names
    
     
SN29403405_A-9110_En_1806XX.book 5 ページ ２０１８年７月５日 木曜日 午後２時４３分