Bogen Nyquist Networked 4-Channel Power Amplifier (4 x 300W) - Manual (Page 4)

NQ‑A4060‑G2, NQ‑A4120‑G2, NQ‑A4300‑G2
(Figure 1) Bridged Wiring
+ – G
+ – G
+ – G
+ – G
LINE
INPUT 1
LINE
INPUT 2
LINE
INPUT 3
LINE
INPUT 4
+ – G
+ – G
+ – G
+ – G
LINE
INPUT 1
LINE
INPUT 2
LINE
INPUT 3
LINE
INPUT 4
connected across a single, different terminal on each channel
(A+ and B- and/or C+ and D-) ( see Figure 1 ).
If 2-Channel Mode is used, then Channel A is connected to A+ and
A- terminals, Channel B to B+ and B- terminals, Channel C to C+ and
C- terminals, and Channel D to D+ and D- terminals ( see Figure 2 ).
6. If using the Line Input, you can route the signal to any paging zone