Bogen Nyquist Networked 4-Channel Power Amplifier (4 x 300W) - Manual (Page 7)

NQ‑A4060‑G2, NQ‑A4120‑G2, NQ‑A4300‑G2
Viewing and
Understanding LEDs
Two LEDs appear on the front of
the amplifier. One is labeled POWER
and appears as solid red during initial
power up, flashes green during a boot
sequence, and appears solid green
when fully booted.
The STATUS LED uses the following
indicators to provide information
about the appliance:
• FLASHING RED –
No network connection found.
• SOLID BLUE – The amplifier is
in an uninitialized state and is
not associated to a server.
(The server may be in a discovery
mode.)
• SOLID GREEN – The amplifier is registered to a Nyquist
server and is in normal operation.
• FLASHING GREEN – The amplifier has an IP address but
is not registered with the Nyquist server.
• SOLID RED – The amplifier needs to be rebooted or reset
so that the Nyquist application can resume.
• FLASHING BLUE – The amplifier is updating.