Emerson OXYBALANCE IM-106-4050 - Manual (Page 31)

Instruction Manual
IM-106-4050 Original Issue
March 2006
OxyBalance Oxygen Display
and Averaging System
http://www.processanalytic.com
Section 5 Maintenance and Service
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5-1
PanelView Plus 600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5-1
MicroLogix 1200 Programmable Controllers . . . . . . . . . . page 5-6
OVERVIEW This section describes the removal and replacement of the PanelView Plus
600 and the MicroLogix 1200 Programmable Controllers.
PANELVIEW PLUS 600 The PanelView Plus 600 touch screen interface is visible through the front
panel cutout. The internal circuitry is housed inside the NEMA 4X protective
enclosure.
The PanelView comes equipped with the following features:
• AC or DC power connection and cord
• Mounting lever slots
• RS-232 and USB ports
• Touch screen interface
• Communication module and cord
• Compact flash memory card slot
Before starting to install this equipment, read the "Safety Instructions" in Appendix A: Safety
Data. Failure to follow the safety instructions could result in serious injury or death.
Disconnect all power before installing or replacing components. Failure to disconnect power
may result in electrical shock and/or damage to the equipment.
Install all protective equipment covers and safety ground leads after installation. Failure to
secure covers and ground leads could result in serious injury or death.