How to clear hose clogs, How to maintain – Eureka 4650 User Manual
Page 13
13
How to Clear Hose Clogs
NOTE:Turn off the switch and unplug the electrical
cord before clearing hose.
1. Locate hose adapter on the front of the cleaner.
2. Push button on hose adapter and pull hose upward to
release hose from top of cleaner.
HOW TO MAINTAIN
(continued)
Hose
Adapter
3.
On the back of the cleaner, pull up on hose assembly to
release from hose retainer.
4.
The hose is free of the cleaner. Check for clogs in the
hose retainer and throughout the hose assembly.
5.
Use a tool that will not puncture the hose. Clear any debris
from the hose retainer or the hose assembly that could
restrict air flow.
6.
Flexing the hose may help loosen the clog.
7.
After the clog is removed make sure the hose assembly
is reassembled onto the unit.
Button
Hose Assembly
s
8.
If the clog is hard to remove, check the brush roll area.
Remove the hood and clear the hose inlet in the brush
roll area.
Hose Retainer