Eureka 4650 - Manual (Page 14)

14
Pre-Motor Filter
Check the pre-motor filter each time the cyclonic dust cup is
emptied. Clean or replace as needed.
To Clean Pre-Motor Filter
1. Remove filter centered in the bottom of the dust cup
compartment.
2. Shake filter to remove excess dust. If necessary, the filter
can be cleaned by vacuuming with another cleaner or washing
with mild detergent.
3. Reinstall filter after completely dry.
NOTE: If rubber gasket separates from motor adapter,
re-position securely on top edge before using
cleaner.
HOW TO MAINTAIN
(continued)
Use GENUINE EUREKA replacement pre-motor filter, 39348.
1
3
Motor
Adapter
Pre-Motor Filter
Motor
Adapter
Gasket
To remove HEPA cartridge filters
1. Push down latch and pull filter cassette back.
2. Then lift filter up and remove.
To replace HEPA cartridge filters
1. Place bottom tabs of filter cassette into slots.
2. Rotate filter toward cleaner.
3. Push upward on the latch to secure into place.
NOTE: To have the benefit of a sealed HEPA system, you must
use one of the HEPA cartridge filter systems.
To remove HEPA/Micron filters from
filter frame
1. Push down latch and pull filter frame back.
2. Then lift filter up and out of filter frame.
To replace HEPA/Micron filters into
filter frame
1. Place new filter in filter frame. Place bottom tabs
of filter frame into slots.
2. Rotate filter frame toward cleaner.
3. Push upward on the latch to secure into place.
HEPA Cartridge Filters
(Only for models with HEPA
cartridge.)
Check the HEPA filters with each disposable dust bag change.
Replace twice a year or after every six bag changes.
HEPA/Micron Filters in Filter Frame
(Only for models with HEPA/Micron filter frame)
Check the HEPA/Micron filter with each disposable
dust bag change. Replace twice a year or after every
six bag changes.
Filter Frame plus
filter (depending
on your vacuum
model)
,


 

y z
P
Q
Latch
Tabs
Filter cartridge
(One complete unit)
Use GENUINE EUREKA replacement HEPA filter,
60285B.
Use GENUINE EUREKA replacement filters,
HEPA, part no. 61500; Micron, part no. 60801.