Eaton Electrical 1000 - Manual (Page 18)

GETTING STARTED
EATON Power Xpert ® Gateway Series 1000 Card User’s Guide S 164201670 Rev 1 14
12. Type 6 and press Enter to save and apply all settings (see Figure 16).
13. Type y and press Enter to confirm that you want to save and apply
all settings and exit the utility.
---------------------------------------------------------
---------------- Network Settings ----------------
---------------------------------------------------------
1. Ethernet Port 1 Settings
2. Ethernet Port 2 Settings
3. DNS Server (Primary)
: 10.222.51.8
4. DNS Server (Secondary) : 10.222.1.75
5. Reset to Factory Defaults and Exit
6. Save & apply all settings
0. Exit without saving
Select an option ==> 6
Save & apply all settings? (y/n): y
Figure 16. Save and Apply All Settings