Estate E-SC 1102 - Manual (Page 23)

6.2
Gate Movement Variables LED Chart
Function
LED
Function
A
Function Logic — Logic flow chart found on page 18,19
1= A (Automatic - automatically closes the gate depending on the
set pause time. It is the most common setting)
2= S (Safety - designed for higher control and accelerated levels of
safety, also automatically closes the gate)
3= AP (Stepped Automatic - is very similar to automatic (A) but
has a higher amount of safety. It has an increased amount
of motion stop points.)
4= EP (Stepped Semi-automatic - is designed to function similar to
a garage door opener. Turns off the auto close setting.)
B
Pause Times
1= 5 Seconds
2= 10 Seconds
3= 20 Seconds
4= 30 Seconds
C
Master Opening / Closing Delays
1= open 0 sec. / close 0 sec.
2= open 2 sec. / close 2 sec.
3= open 2 sec. / close 4 sec.
4= open 2 sec. / close 8 sec.
D
Static Force
1= Low
2= Medium Low
3= Medium High
4= High
E
Speed
1= Low
2= Medium Low
3= Medium High
4= High
Variable LED Definitions
Pressing P1 moves you
through the Letter LEDs After switching to the de-
sired Letter LED, Pressing
P2 moves you through the
Number LEDs