Estate E-SC 1102 - Manual (Page 3)

Estate Swing Summery of Functions
The Estate Swing is only to be used for vehicular swing gates in a Class I
setting.
Class I:
A vehicular gate opener (or system) intended for use in a home of
one-to-four single family dwelling, or a garage or parking area associated
therewith.
The FAAC Estate Swing automated system was designed and built for controlling
vehicle access. Do not use for any other purpose.
The EstateSwing automated system automates residential swing-leaf gates with
leaves of up to 12’ in length.
It consists of a locking electro-mechanical linear operator, powered by a 12V DC
battery, coupled with control board recharging the battery. The SLAVE equipment
is controlled by the MASTER equipment to which all accessories and pulse gen-
erators are connected. The MASTER card can be programmed and is used to set
the following: function logics, work times (by self-learning) and pause times, leaf
speed, and the sensitivity of the anti-crushing device.
The system will automatically lock when the motor is not operating. A release sys-
tem enables the gate to be moved by hand in case of a system failure.
Keep this manual safely stored after
installation.
Serial Number__________________________
Date of Purchase_______________________
Place of Purchase______________________
Have this information on hand while handling all
service and warranty issues.
This manual and its contents are produced by Web Direct Brands, Inc. and is based on the instructions
written by FAAC,