Corsair T1 RACE 2018 Gaming Chair (Black/Blue) - Manual (Page 4)

4 3 4 3
2. Install the gas lift and gas lift
cover into the top of the chair
base by placing the larger end
into the hole in the center of the
chair base.
A. Place the gas lift cover over the
gas lift with the larger opening
facing down.
B. Remove the red protective cover
from the top of the gas lift.
C. WARNING : The seat height
adjustment will not function if the
red protective cap is not removed
from the gas lift.
4. Chair seat assembly.
A. Remove the four screws from the seat cushion bottom using the M8
allen key provided.
B. The control base is labeled with a arrow showing the “front” of the unit
that needs to be installed facing the front of the chair.
C. Using the four screws from the seat cushion bottom attach the seat
control base to the seat cushion.
T1 RACE Assembly Instructions
1. Insert chair wheels into chair
base by pressing the stud
firmly into the hole on the
bottom of the base.
3. Place completed chair base
assembly to the side.