Corsair T1 RACE 2018 Gaming Chair (Black/Blue) User Manual
Page 5
6
5
6
5
6. Place seat assembly onto
the chair base assembly by
inserting the gas lift cylinder
into the center hole in the seat
control base.
A. It will slide into place. Make
sure the seat assembly is firmly
pressed down into place before
using the chair.
8. Enjoy your new T1 RACE
gaming chair.
5. Chair back to seat assembly.
A. Remove the screws from the seat back
using the M8 allen key provided.
B.
TIP
: Start with the right side of the chair
with the recline mechanism. It is much
easier to start on this side as the mount
point is fixed in place. Do not tighten the
screws down completely until you have
both sides (all four bolts) started in the
seat back.
C. Use the screws taken from the seat back
to attach the seat cushion and the seat
back together.
7. Snap the chair back covers into
place over the attachment points
between the seat cushion and
the seat back.
A. There is a right and left side cover.
The taller of the two covers is for
use over the side with the handle
for the recline function.