Electrolux 41016VH - Manual (Page 11)

11
Using the Rings
Initial Cleaning
You should clean the appliance thoroughly before using for the first time.
Wipe the glass ceramic cooking surface with a damp cloth.
1
Attention: Do not use sharp or abrasive cleaning materials. These could damage
the surface.
3
For appliances with metal fronts, use normal commercially available cleaning
agents.
1. Turn the oven functions dial to Light .
2. Remove all accessories and the side rails and clean with warm water and wash
ing up liquid.
3. Wash the oven in the same way, with warm water and washing up liquid, and
dry it.
4. Wipe the front of the appliance with a damp cloth.
Using the Rings
3
When a cooking zone is switched on, it may hum briefly. This is a characteristic
of all ceramic glass cooking zones and does not impair either the function or the
life of the appliance.
Heat settings
• Heat settings can be set from 1 9.
• Intermediate positions are possible for settings 2 7.
1 = lowest output
9 = highest output
= double ring switching
2
Switch the cooking zone off approx. 5 10 minutes before cooking is finished to
make use of the residual heat. This saves electricity.