EverFocus NEV10 EZN850 - Manual (Page 35)

EZN850
35
4.4.2.8.5 PRIVACY
This mode covers the areas you do not want to see on the screen.
1) Please direct the arrow to point to “PRIVACY” by clicking UP (c) or
DOWN (d) key.
2) Select “ON” by clicking LEFT (e) or RIGHT (f) key.
3) Click the SET key.
z Please select the area you would like to cover from the 4 areas in AREA
SEL mode.
z
Please select ON mode for the chosen area.
z
Please select AREA TONE for cover area color. The smaller the number,
the darker the color.
z Please click UP (c) or DOWN (d) key to move between TOP, DOWN,
LEFT and RIGHT for adjusting the size of the area to be covered.
z Please click LEFT (e) or RIGHT (f) key to adjust the value for size of the
area to be covered.
z
Additionally, it is possible to change the position of the area to be covered.
Please refer to the following example for detailed steps on moving AREA1
to center.
PRIVACY
> AEREA SEL AREA1
AREA STATE. OFF
AREA TONE |+++++++++| 80
TOP |++++++++| 10
DOWN |+++++++++| 25
LEFT |+++++++++| 20
RIGHT |+++++++++| 40
SPECIAL
CAMERA ID OFF
COLOR ADJ.
<┘
SYNC. INT
MOTIION DET OFF
> PRIVACY ON <┘
MIRROR OFF
SHARPNESS ON
<┘
RESET
RETURN <┘
AREA1 AREA2
AREA3 AREA4