Eureka 4500 - Manual (Page 15)

15
Motor will not start. Electric Plug Push plug securely into outlet.
Try another outlet.
Check circuit breaker.
Motor suddenly stops. Thermal Cut Off Refer to page 7.
Does not clean the carpet Disposable Dust Bag Change the bag and clean or replace the
or floor. and Filter(s) filter(s). Hint: If picking up fine dust, the bag
may not look full but a fine substance tends
to reduce suction when it blocks the airflow
through the paper bag and filter(s).
Dust Bag Be sure hose adapter inserts into paper bag.
Belt Replace a cut, loose or out of shape belt.
Belt Cover Snap the belt cover inside the hood if it comes
loose.
Brush Roll Clean hair and thread from bristles and end
cap area. Replace brush roll if bristles are worn.
Hose Remove any clogs from the hose that restrict
the airflow. Check short hose in the base and
long hose. Refer to page 12 & 13.
No suction at the end of Hose Adapter Hose adapter has to seat inside the dust bag.
the hose.
Disposable Dust Bag Change the bag and clean or replace the
and Filter(s) filter(s). Hint: If picking up fine dust, the bag may
not look full, but a fine substance tends to reduce
suction when it blocks the airflow through the
paper bag and filter(s).
Hose Remove any clogs from the hose that restrict the
airflow. Check short hose in the base and long
hose. Refer to page 12 & 13.
Headlight not working. Light Bulb Replace light bulb.
Noise from the brush roll Brush Roll Remove hood and clean debris or items
area. from the brush roll area.
Belt Replace a cut, loose or out of shape belt.
Cleaner is hard to push. Cleaner Height Setting Put handle in operating position. Tilt the
cleaner back to raise the front wheels off floor.
Then turn the knob to a higher setting.
Belt Replace a cut, loose or out of shape belt.
Cleaner height knob will Cleaner Height Hint: Put handle in operating position. Tilt the
not turn. Setting cleaner back to raise the front wheels off floor.
Then turn the knob.
PROBLEM SOLVING
NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM CAUSE SOLUTION
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓