DNP DP-QW410 Photo Printer - Manual (Page 13)

13
USB
5.0 V DC, 2.0 A
Power
inlet
OFF
ON
1
Make sure that the ON/OFF switch of the printer unit is set to OFF.
2
Make sure that the power switch of the computer is set to OFF.
3
Plug the connector of the power cord (supplied) into the printer power inlet.
4
Plug the power cord into an outlet.
5
Connect the printer unit’s USB connector and the computer with a USB cable.
6
Set the ON/OFF switch of the printer unit and the power switch of the computer
to ON.
Printer Installation
Caution
• Use a shielded USB cable compatible with the USB 2.0 specifications. Otherwise
unexpected troubles may arise.
Connecting the power cord and a computer