DNP DP-QW410 Photo Printer - Manual (Page 22)

22
Printer Installation
Paper scraps generated when the paper is cut are collected in the trash box. Be sure to
empty the trash box when replacing the paper.
1
Remove the printer unit’s trash box.
After removing the trash box, paper scraps
may be stuck to the printer unit.
If this happens, remove the paper scraps.
2
Dispose of paper scraps.
(Several sheets of paper scraps may remain in
the trash box.)
3
Attach the printer unit’s trash box.
Caution
• Do not remove the trash box during printing. Doing so may cause trouble.
• When the trash box has been removed, do not touch the cutter on the upper part or
you may be cut.
• Troubles may occur if the printer is used when the trash box is full.
Disposing of paper scrap
Trash box
Trash
box
Teflon tape
Caution
• Please do not remove the tape.