Brother QL-810W Ultra-Fast Label Printer with Wireless Networking - Manual (Page 168)

Changing Your Label Printer Network Settings
158
13
c Double-click the unconfigured device.
Note
If you do not use a DHCP/BOOTP/RARP server, the device appears as [ Unconfigured ] in the BRAdmin
Light utility screen.
d Select [ STATIC ] for [ Boot Method ]. Type the [ IP Address ], [ Subnet Mask ], and [ Gateway ] settings (if
needed) for your print server.
e
Click [ OK ].
f If you have set the IP address up correctly, the Brother print server appears in the device list.