Epson 7850p - Manual (Page 144)

144 Managing Projectors
Using EMP Monitor
EMP Monitor lets you use a remote computer to manage your
projectors, whether connected wirelessly or over a wired network. It
lets you easily turn the projectors on or off (together or individually),
switch image sources, and check their status.
Before using EMP Monitor, make sure you’ve installed the software as
described in Appendix A. The computer you’re using to monitor the
projector should already be connected to your network.
Opening and Closing EMP Monitor
To start EMP Monitor, click Start > Programs or All Programs >
EPSON Projector > EMP Monitor .
If you’ve added the program to the Startup programs folder (see
page 151), then it may already be open. If so, click the icon in the
system tray on the lower-right corner of your screen to display the
EMP Monitor window:
To close EMP Monitor, right-click the program icon shown above,
then select
Exit .
note
If you want to monitor
projectors while they are in
standby mode, select
Standby Mode in the
Advanced 1 menu, then
select
Network ON . See
page 138.
Click here to start EMP Monitor