Epson 7850p - Manual (Page 28)

28 Displaying and Adjusting the Image
Correcting Computer Images
If you’re connected to a computer and the image doesn’t look right,
press the
Auto button on the remote control (or the Auto/Enter
button on the projector’s control panel). This automatically resets the
projector’s tracking, sync, resolution, and position settings.
If vertical bands appear in the projected image and the Auto button
doesn’t correct the problem, hold down the Shift button on the
projector’s control panel while pressing either the Tracking + or the
Tracking - button.
If the image appears fuzzy or flickers and the Auto button doesn’t
correct the problem, hold down the Shift button while pressing either
the Sync + or Sync - button.
note
You must be projecting an
image for this button to have
any effect. The
Auto button
works only with computer
images.
Auto button