Epson 7850p - Manual (Page 20)

20 Displaying and Adjusting the Image
Selecting the Image Source
Selecting the image source lets you switch between images input from
different pieces of equipment connected to the projector (such as a
computer or DVD player).
If you don’t see the image you want, select it using the Source
buttons either on the projector or the remote control.
The Source buttons work as follows:
■ The projector has two Source buttons. Use the Computer/DVI
button to switch between EasyMP , and between equipment
connected to the Computer and DVI ports.
Use the Video/BNC button to switch between equipment
connected to the Video , S-Video , and BNC ports.
■ The remote control has six Source buttons. Use them to switch
between equipment connected to the port identified on each
button, or select EasyMP to project wirelessly or from a memory
card.
Note that the Computer and BNC ports can be set up to use different
input signals (for example, Analog RGB or RGB Video)—so if you
have equipment connected to one of these ports, it’s important to
make sure the correct signal is selected to match the equipment you’re
using. You can change the input signal settings using the projector’s
menu system; see page 137.
note
To focus and adjust the
image, see page 24. If a
projected image fails to
appear, see page 21 for help.
note
You can also preview all
sources on one screen to help
you select the desired source
(see page 36).