Epson 410 User Manual
Page 26
Designing Labels Using LDS
Chapter 4
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
410 Operators Manual
20
Microcom Label
Figure 5
The sequence ^D57<CR> puts the printer in format entry mode.
The next line is the header information: sizing the label (615 dots wide 153 dots high).
The next four lines are layout information for each printable text string.
The sequence ^D56<CR> selects the user layout.
The sequence ^D2<CR> tells the printer to start accepting text data for each defined field.
The next three lines contain the text for each field. The first string will be TSN# 1, the second will be
TSN#2 and so on.
Text string #3 is accessed twice. The format will print the word 'easy' and then the barcode
equivalent.
The sequence ^D3<CR> starts the print cycle (unless otherwise defined, it will print one copy).