Epson 410 - Manual (Page 54)

Printer Commands Chapter 5
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
410 Operators Manual 48
^A ^D Command
XX 75 Load Label Count: Tells the printer to print a batch of labels using the serial
number function if enabled. Can be used in conjunction with load copies count
(^D73, see section 5.3). The batch of labels will be printed when a ^D3 is
executed. Therefore, this must precede a ^D3 command. The only difference
between this command and ^D73 is in the ability of this command to increment
and decrement serial numbers in the batch.
A sample program using the single serial number feature:
^A2^D86<CR>
^A1^D84<CR>
^A5^D85<CR>
^A3^D75<CR>
^D57<CR>
1,616,297,5,6,31,,1,43<CR>
1,435,24,2,1,14,0,,1,1,3<CR>
^D56^D2<CR>
20<CR>
^D3<CR>
A sample program using the multiple serial number feature:
^A2^D88<CR>
^A1^D88<CR>
^A3^D89<CR>
^A9^D75<CR>
^D57<CR>
3,640,164,,17,30,,1,177<CR>
1,100,20,4,1,11<CR>
2,100,40,4,1,11<CR>
3,100,60,4,1,11<CR>
^D56<CR>
^D2<CR>
100<CR>
200<CR>
300<CR>
^D3<CR>