Eureka 4670 Series - Manual (Page 6)

 ,
  y z |
6
8. Remove front cover by pulling out on the front cover
latch and lifting the front cover upward and out.
9. Check to be sure the paper bag collar is secure with
the hose adapter inside the paper bag collar.
10. Replace front bag cover.
11. You will find your cord retainer on the handle above
the upper cord hook. Firmly push the electrical cord
down into the cord retainer. This will place the cord
out of the way the next time you vacuum.
12. Next wind the cord around the two cord hooks on
the left side of cleaner.
NOTE: For easier access to bag compartment, when
you store the electrical cord use a figure 8
pattern.
13. Secure the plug to the cord to prevent unwinding.
Hose
Adapter
|
8
10
Cord
Hook
Step G Store Electrical Cord
Step E Store Hose and Accessories Step F Check Disposable Dust Bag
Combination
Tool
Crevice
Tool
Hook
Hose
Retainer
9
Cord
Hook
11
12
12
Cord
Retainer
Extension
Wand or
Wands
Carrying
Handle
HEPA Filter
(on some
models)
Optional Dusting Brush and
Upholstery Tool can be
stored in place of the
combination tool on handle
pegs.
Handle
Pegs
Paper Bag Collar
Front Cover
Latch