Emerson Radio PD6528 - Manual (Page 10)

9
To repeat a single track, press the
REPEAT Button ❶ once;
”REPEAT” will appear in the
display. Press the Skip/ Forward
(
) or Skip/Reverse ( )
Buttons ❷ to select the specific
track that you wish to repeat.
When the desired track number
appears in the display, press the
CD PLAY/PAUSE (Š ) Button ❸
to begin playback. The specific
track you selected will be
repeated continuously.
1
2
1
To cancel Repeat Playback,
press the REPEAT Button ❶ until
the Repeat indicator disappears
from the display. You can also
cancel Repeat Playback by
pressing the CD STOP (■) Button
❷
or by setting the FUNCTION
Switch ❸ to the TAPE(Off)
position.
1
3
2
3
To repeat all of the tracks on a
disc continuously, press the
REPEAT
Button ❶ twice;
“REPEAT ALL” will appear in the
display. Press the CD
PLAY/PAUSE (Š ) Button ❷ to
begin all tracks repeat.
2
2
1
3
2
REPEAT PLAYBACK
Set the FUNCTION Switch to the
CD position.
1
Press the CD PROGRAM Button.
The Program indicator and the
Program Memory #00 flash
in the display
.
3
Open the CD Compartment door
and insert your disc in the CD
player. Close the CD compartment
door. Wait for the CD player to read
the table of contents and display the
total number of tracks on the disc.
2
PROGRAMMED PLAYBACK
The CD player in this unit has a 19-track programmable memory that allows you to program up to 19 tracks
on any disc for playback in any desired order. You may program 19 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
PD6528 O/M.QXD 5/7/03 7:38 AM Page 9