Emerson Radio PD6528 - Manual (Page 11)

10
Press the Skip/Forward ( ) or
Skip/Reverse ( ) Buttons ❶ to
select the first track that you wish to
program. Example: Track 05. When
the desired track number (Example:
Track 05) is flashing in the display,
press the CD PROGRAM Button ❷
again to enter track '05' in program
memory '01'. Track '05' disappears and
'00' flashes again in display. You
may now select a track to be entered
in program memory '02'.
1
1
2
4
Press either the Skip/Forward
(
) or Skip/Reverse ( )
Buttons ❶ to select the next track
you wish to program (Example:
Track 08). When Track 08 is
flashing in the display, press the
PROGRAM Button
❷ again to
enter track '08' in memory number
'0
2'.
1
1
2
5
Repeat step 5, selecting a
different track each time, until you
have programmed up to 19 track
numbers into the CD Program
Memory.
1
1
2
6
After programming up to 19 tracks in the CD Program Memory, press the CD
PLAY/PAUSE (Š ) Button ❶ to begin programmed playback. “PROGRAM will
begin flashing in the display and playback will begin on the first track that you
programmed. The player will continue to play all of the tracks that you
programmed in the order in which you programmed them. When the last
programmed track has been played, the player will stop and the display will
again show the total number of tracks on the disc. “PROGRAM” remains in the
display and the program is still active. If you press the Program button and then
press the CD PLAY/PAUSE button ❶ again, playback will start on the first track
you programmed and will continue until all the programmed tracks have been
played.To cancel the Programmed Playback mode, press the CD Door OPEN
Button ❷ to open the CD Compartment Door or set the FUNCTION Switch ❸ to
the RADIO or TAPE(Off) positions.
1
2 3
7
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First, program
the tracks you wish to hear in the
order you wish to hear them, as
described above. Then, press the
REPEAT Button twice.
The
REPEAT ALL indicators will
appear in the display.
1
Press the CD PLAY/PAUSE (Š )
Button to begin programmed
repeat playback. The player will
play the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
2
Program Repeat operation will
continue indefinitely until you
press the CD STOP (■) Button ❶,
open the CD door or set the
FUNCTION Switch ❷ to the
RADIO or TAPE (Off) position.
1
2
3
PROGRAMMED REPEAT
PD6528 O/M.QXD 5/7/03 7:38 AM Page 10