Emerson Radio PD6528 - Manual (Page 12)

11
Set the VOLUME Control to a low
setting.
1
Insert a pre-recorded cassette into
the slots in the Cassette Door with
the open end facing up and the full
reel on the right side. Close the
cassette door.
Emptiest reel
Open surface side
4
Open the Cassette Control Cover
to expose the cassette controls
and press the Stop/Eject (
)
Button to open the Cassette Door.
3
Slide the FUNCTION Switch to
the TAPE position.
2
To pause playback momentarily,
press the cassette Pause ( )
Button. The tape movement stops
but the tape motor is still running.
Press the cassette Pause ( )
Button again to release Pause
and resume normal playback.
7
When the tape reaches the end,
the auto-stop mechanism
activates, the tape PLAY Button is
released and the tape motor
shuts off. Press the Stop/Eject
(
) Button to open the
Cassette Door and remove the
tape.
9
To stop playback before the tape
ends, press the Stop/Eject (
)
Button, The PLAY Button is
released and the tape motor
shuts off.
8
Press the cassette Play (¥)
Button ❶ to begin playback.
Adjust the VOLUME ❷ and
STEREO-WIDE ❸ Controls as
desired.
3
1
2
5
To advance or rewind the tape
rapidly, press either the cassette
Fast Forward (¥¥) ❶ or Rewind
(ŠŠ) ❷ buttons. When you reach
the desired point, press the
cassette Play (¥) Button ❸ to
resume normal playback.
1 3
2
6
PLAYING CASSETTE TAPES
PD6528 O/M.QXD 5/7/03 7:38 AM Page 11