Synology DiskStation DS620slim 6-Bay NAS Enclosure - Manual (Page 15)

After hardware setup is finished, please install DiskStation Manager (DSM) – Synology’s browser-based
operating system – on your Synology NAS.
Install DSM with Web Assistant
Your Synology NAS comes with a built-in tool called Web Assistant that helps you download the latest version of
DSM from the Internet and install it on your Synology NAS. To use Web Assistant, please follow the steps below.
1 Power on the Synology NAS.
2 Open a web browser on a computer connected to the same network as the Synology NAS.
3 Enter either of the following into the address bar of your browser:
a find.synology.com
b synologynas:5000
4 Web Assistant will be launched in your web browser. It will search for and find the Synology NAS within the
local network. The status of the Synology NAS should be Not installed .
5 Click Connect to start the setup process and follow the onscreen instructions.
6 If you accidentally leave the installation process before it is finished, log in to DSM as admin (default
administrative account name) with the password left blank.
Note:
1. The Synology NAS must be connected to the Internet to install DSM with Web Assistant.
2. Suggested browsers: Chrome, Firefox.
3. Both the Synology NAS and the computer must be in the same local network.
Learn More
Congratulations! Your Synology NAS is now ready for action. For more information or online resources about your
Synology NAS, please visit www.synology.com .
Install DSM on Synology NAS
4
Chapter
15