Bushnell 4.5x40 Equinox Z2 Digital Night Vision Monocular - Manual (Page 7)

7
SUB MENU (CATEGORY) OPTIONS/ITEMS DESCRIPTION SETTINGS
Night Vision Enable Set to “On” for night/low light operation On, Off
IR Illumination Set infrared illuminator level or switch
off the IR light
Off, Low, High
Frame Rate Select image frame rate Slow, Medium, Fast
Night Filter Color Select image appearance for night Green, B&W
Camera Setup Recording Mode Select photo or video image capture Photo, Video
Photo Resolution Select still photo resolution Low, High
Video Resolution Select video resolution 420p, 720p, 1080p
Setup Date Set current date for video timestamp use Keypad+Select buttons
Setup Time Set local time for video timestamp use Keypad+Select buttons
Time Format Set time format preference 12 hrs, 24 hrs
Video Timestamp Enable/disable video timestamp On, Off
Bushnell Watermark Enable/disable watermark stamp on
photos/videos
On, Off
Gallery n/a Review photos, playback videos, delete
unwanted files.
Display Settings Day Brightness Select viewing brightness for daytime 1 ~ 15 (8)
Night Brightness Select viewing brightness for night 1 ~ 15 (8)
HUD Color Select preferred color for display icons
and characters
Green, White, Red, Yellow,
Cyan, Magenta
HUD Timeout Select time before display turns off 10 sec, 15 sec, 30 sec, Never
Display Time Enable/disable displayed time On, Off
Wi-Fi Setup Wi-Fi (enable) Enable/disable Wi-Fi operation On, Off
SSID ID for Wi-Fi network (default is “Equinox
Z2” for wi-fi from phone app.)
use Keypad+Select buttons
Password Password for Wi-Fi network (default is
“bushnell” for wi-fi from phone app.)
use Keypad+Select buttons
WPA2 Security Enable/disable Wi-Fi security (disable
only if sharing with others is needed)
On, Off
Auto Power Off n/a Select time for automatic power off after
last control operation (button press)
10 min, 15 min, 30 min, 60
min, Never
Advanced Settings Format SD Card Erase all files on card via quick format
(FAT32). CAUTION-back up all files first.
Yes, No
Factory Reset Restore all menu settings to original
defaults
Yes, No
Software Version Display installed software version Press Select to display
Exit Settings n/a Exit all menus, return to normal viewing Press Select button to exit
SETTINGS MENU REFERENCE (default factory settings indicated in bold)
NOTE: All Sub Menus with more than one option also include “Return” as the last listed option. Select this to return to the main
Settings Menu. Or, as a shortcut, press the Record button (F) to exit the entire menu system at any time and return to normal viewing.