Chapter 2. setting up the dock, Connecting the dock to your computer, Installing and uninstalling the device driver – Lenovo ThinkPad Hybrid USB Type-C Laptop Dock with USB Type-A Adapter User Manual

Page 9

Advertising

Chapter 2. Setting up the dock

This chapter provides information about setting up the dock.

Connecting the dock to your computer

To connect the dock to your computer, do the following:

Note:

Ensure that you use the USB-C cable, the ac power adapter, and the power cord that come with the

dock.

1. Connect the power cord to the ac power adapter.

2. Connect the power cord to an electrical outlet.

3. Connect the ac power adapter to the power connector on the dock.

4. Connect one end of the USB-C cable to the USB-C connector (for connecting computer) on the dock.

5. Connect the other end of the USB-C cable to the computer by doing one of the following:

• Connect the USB-C cable to the USB-C connector on the computer

.The dock supplies power to

the computer.

• Connect the USB-C connector of the cable to the USB converter. Then connect the USB converter to

the USB 3.1 connector on the computer

. The dock does not supply power to the computer.

Installing and uninstalling the device driver

Ensure that the device driver for the dock is installed on your computer before using the dock.

Advertising