Opening the cowl (hood), Data label location, Fig. 20 unlatching cowl – E-Z-GO 602080 User Manual

Page 29: Operation and service information

Advertising
background image

OPERATION AND SERVICE INFORMATION

Page 13

Owner’s Manual and Service Guide

Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings

Vehicle may be equipped with a receiver that accepts a
standard 2" ball hitch. Trailer range of motion is limited by
the ball and hitch and should not be used on rough trails
or over objects such as logs, large rocks, holes, etc.

Never install non-factory baskets or extensions in hitch
receivers (front or rear). Such items change performance
characteristics of vehicle and result in unsafe handling,
possible roll over or vehicle damage.

Remember a loaded trailer always reduces overall
capacity of vehicle.

At no time should tongue weight be more than 150 lbs
(68 kg).

The maximum weight that can be towed on a trailer is
1500 lbs. (680 kg).

OPENING THE COWL (HOOD)

To lift cowl (Ref. Fig. 20 on page 13):

Pull down and out on both latches to clear receiv-
ers mounted to frame

Lift cowl up fully to allow catch to rest on cross-
member and release cowl

To lower cowl:

Lift cowl up fully with one hand to remove weight
from catch

Pull catch away from crossmember with other
hand

Lower cowl until catch clears crossmember and
continue lowering cowl with both hands

Once seated on rubber bumpers, secure with
latches

DATA LABEL LOCATION

Serial number label is located on body just below air
intake louvers near choke knob.

Manufacture date code and repeat of serial number are
on data labels located on frame crossmember under bed.
See LOAD BED on page 8.

Design changes take place on an ongoing basis. In order
to obtain correct components for vehicle, manufacture
date code, serial number and vehicle model must be pro-
vided when ordering service parts.

Fig. 20 Unlatching Cowl

Ref Lco 1

Latches

Catch

Latch

Receiver

Advertising